One Meter of Capricorn's excellent quality translucent blue tubing. 2mm inner, 4mm outer diameter for 1.75mm filaments. This blue translucent tubing is produced from the finest pure virgin transparent PTFE. Guarantee to always be the right diameter and perfectly round. Each meter of tubing comes with one Capricorn stic
One Meter of Capricorn's excellent quality translucent blue tubing. 2mm inner, 4mm outer diameter for 1.75mm filaments.
This blue translucent tubing is produced from the finest pure virgin transparent PTFE. Guarantee to always be the right diameter and perfectly round.
Each meter of tubing comes with one Capricorn sticker to decorate your printer.
Data Sheet
Premium TL Series Light Blue Tubing
Additives
Blue Color
Best For Chunky Filaments
YES
Best For Flexible Filaments
NO
Can See Through
YES
Pulling Friction♠
0.8
Color
Blue, Translucent
Density (kg/m3)
2100 +/-100
Hardness
55
Inner Diameter (mm)
2.05 +/- 0.05
Linear Thermal Expansion at 250 °C
3.4-3.6%
Material
Highest Quality Pure Virgin PTFE
Melting Point (°C)♥
around 300
Outer Diameter
3.95 +/- 0.05
Roundness (ϵ)
< 0.1
Stiffness§
Medium
Thermal Conductivity (W/m-k)
0.25
Wear Rate (gm/s)
0.01
Young's Modulus (GPa)¥
0.5
♠Pulling Friction is calculated as the average force required to pull 1.2 meters of 1.75mm PLA filament through 1 meter of tubing at a constant speed, relative to 1 meter of cheap white reference tubing. Note that although we observed the friction of the TL series to be about the same or even slightly lower than our XS series, it also has a larger internal diameter.
§Other Bowden tubes may vary significantly in stiffness, depending on the material from which they're made. Our tubing generally tends to be more flexible than most, with the TL being more flexible than XS.
¥Young's Modulus (YM) is the measure of elasticity of the material. Our XS Series additives give the PTFE a slightly greater YM than the TL Series.
♥Temperatures were approximated by heating samples of all tubing simultaneously, observing how quickly each one began to deform. Printer failures may happen at significantly lower temperatures.
Printing high temperature materials may create dangerous off-gassing. Please refer to the Safety Page.
1 Meter- XS Low Friction 1.75mm Bowden Capricorn Tubing — FormTech
PTFE, or Polytetrafluoroethylene, is a synthetic polymer commonly used as a coating for non-stick pots and pans. It is the slipperiest substance known
Capricorn TL Bowden Tubing 1.75mm
PTFE, or Polytetrafluoroethylene, is a synthetic polymer commonly used as a coating for non-stick pots and pans. It is the slipperiest substance known
Capricorn TL Bowden Tubing 1.75mm
3DMakerWorld Capricorn XS Series Low Friction PTFE Bowden Tubing 2 Meters for 1.75mm Filament : Industrial & Scientific
Genuine Capricorn Bowden 3mm Tubing (1 meter) (M-BOWDEN-TUBING-PRO-300) : Industrial & Scientific
Capricorn TL Series PTFE Bowden Tube –
Capricorn PTFE Bowden Tubing, made especially for 3D printers. Excellent quality translucent blue tubing. , Perfect for 1.75mm filaments. This blue
Capricorn Blue Translucent Bowden Tubing
OD- 4.0mm, One meter of our flagship PTFE Capricorn Tubing, enhanced with a proprietary blend of high performance additives. 1.9mm inner, 4mm outer
1 Meter- XS Low Friction 1.75mm Bowden Capricorn Tubing
Capricorn TL Premium Translucent PTFE Bowden Tube 1.75mm 4x2mm farbig Schlauch
CAPRICORN TL PTFE 1.75mm - 1M - Επαγγελματική 3D Εκτύπωση