Improve your print quality with our Pro Series PETG+ filament. We only use quality materials to produce our filament to ensure your printed parts outperform
Improve your print quality with our Pro Series PETG+ filament. We only use quality materials to produce our filament to ensure your printed parts outperform your design requirements.
Filament Specs:
Hotend Temperature (°C): 220-245 (Recommended: 230)
Bed Temperature (°C): 75-85 (Recommended: 80)
Filament Diameter (mm): 1.75±0.05
Net Weight: 1kg (2.2 lbs)
Build Surface: Polypropylene or PEI
Print Parameters:
We have spent thousands of hours testing our filament with several printer types and recommend these printing settings.
Default Print Speed: 30-60 mm/s (Recommended: 40 mm/s)
First Layer Height: 0.28 mm*
First Layer Speed: 15 mm/s
Extrusion Width: 0.48 for 0.4 Nozzle (1.2X Nozzle Diameter)
Retraction: Bowden 5mm @ 45 mm/s or Direct 2mm @ 45 mm/s
Perimeter Print Speed: 70% of Default Print Speed
Infill and Support Print Speed: 80% of Default Print Speed
Fan Profile:
Layer 1: 0%
Layer 3: 25%
Layer 5+: 50%
XY Jerk: 8
Z Jerk: 0.3
E Jerk: 5
Acceleration (Print/Travel): 300
Retract Acceleration: 1000
Travel Speed (non-print moves): 120 mm/s
*Special Notes:
Most users who are used to printing PLA tend to set their first layer height too low. PETG tends to build-up on the nozzle during the first layer causing adhesion issues. We recommend a first-layer thickness of 0.28mm.
High Quality Filaments PEEK, PEKK, PEI, PPSU, PCL, PETG, ABS, PLA, C8
AMBROSIA PETG Filament of the Gods - 1KG Bambu AMS Friendly Cardboard
Introducing PETG colorful carbon fiber filament
Parthenon Gray Marble PRO Series PETG Filament - 1.75mm (1kg)
AMBROSIA PETG Filament of the Gods - 1KG Bambu AMS Friendly Cardboard
MatterHackers PRO Series PETG
SunLu PETG Filament 1.75mm Pink – DIY Electronics
MatterHackers Pro PETG Filament Review
Black MH Build Series PETG Filament - 1.75mm (1kg) by MatterHackers
filament - 3D Maker, 3D Printing
PETG Filament, 3D4Makers
JGMaker Artist-D Dual Extruder Independent 3D Printer by JGMaker3d — Kickstarter
MH Build Series PETG is an affordable PETG filament intended for producing strong, quality 3D-printed parts. Best-selling PETG at MatterHackers
Black MH Build Series PETG Filament - 1.75mm (1kg)
1KG PLA 3D Printer Filament
SUNLU 5×1KG PETG Filament High toughness Printer Consumables 1KG Spool White