JBL SUBBP12AM Ported Powered Subwoofer w/ 12 Sub and 150-Watt Amp

Highlights Powered subwoofer enclosure 12" sub with polypropylene cone Built-in 150 watt RMS amplifier (450 watts peak) Remote bass-level control included Speaker- and line-level inputs 8-gauge amp wiring kit required (sold separately) Variable low-pass crossover (40-200 Hz, 12 dB/octave) Variable bass boost (0-12 dB at 45 Hz) Phase switch (0°, 180°) Frequency response: 35-120 Hz Fuse rating: 25A Dimensions: 22-3/8"W x 14-5/8"H x 11-7/8"D1 x 9-1/8"D2 Warranty: 1 year Features Amplifier: The power output from the built-in amplifier is 150 watts RMS (450 watts max). The amplifier is counter sunk into the back panel of the enclosure (the heat sink fins protrude approximately 3/8"). Signal Input: The amplifier has both speaker level (harness) and line level (RCA) inputs. The input sensitivity range is 50mV-4V for the line inputs and 400mV-16V for the speaker inputs. Crossover: The amplifier's low pass crossover point is continuously
Highlights Powered subwoofer enclosure 12 sub with polypropylene cone Built-in 150 watt RMS amplifier (450 watts peak) Remote bass-level control included Speaker- and line-level inputs 8-gauge amp wiring kit required (sold separately) Variable low-pass crossover (40-200 Hz, 12 dB/octave) Variable bass boost (0-12 dB at 45 Hz) Phase switch (0°, 180°) Frequency response: 35-120 Hz Fuse rating: 25A Dimensions: 22-3/8W x 14-5/8H x 11-7/8D1 x 9-1/8D2 Warranty: 1 year Features Amplifier: The power output from the built-in amplifier is 150 watts RMS (450 watts max). The amplifier is counter sunk into the back panel of the enclosure (the heat sink fins protrude approximately 3/8). Signal Input: The amplifier has both speaker level (harness) and line level (RCA) inputs. The input sensitivity range is 50mV-4V for the line inputs and 400mV-16V for the speaker inputs. Crossover: The amplifier's low pass crossover point is continuously variable from 40 to 200 Hz; the crossover slope is 12 dB/octave. Bass Boost: The bass boost circuit provides a variable (0-12 dB) signal boost centered at 45 Hz. Status LEDs: There are two status indicator LEDs on the amplifier. A green LED lights to indicate the amplifier is turned on and operating normally. A red LED lights to indicate the amplifier's protection circuitry has been activated. The protection circuit activates and the amplifier shuts down when the input voltage (power) is too high or too low, when the amp overheats, and when there is a short between the amp and subwoofer. Enclosure Type Ported Finish Material Carpet Grille metal Connector Type RCA, speaker-level Bi-amp Inputs No Woofer Size (inches) 12 Woofer Material Poly Passive Radiator None Parts Warranty 1 Year Labor Warranty 1 Year Specifications Frequency Response 35-120 Amplifier Power (RMS) 150 watts Maximum Wattage 450 watts Sensitivity --- Impedance --- Second Voice Coil Impedance --- Crossover Point 70-120Hz

powered polypropylene subwoofer with built-in amplifier that matches the woofer performance at 150W RMS or 450W Peak. 12 (305mm) woofer | 35 - 120Hz

JBL SUBBP12AM - 450 Watts (150W RMS) 12” Amplified 12 in. Ported Subwoofer with Sub Level Control and Distortion Free Bass with Gravity Magnet Phone

2024 Subwoofer unsung more

JBL GT-BassPro12 450W 12 Ported Loaded Subwoofer Enclosure with 8 AWG Amp Kit

JBL Dual 12 Car Audio Ported Enclosure, Black : Electronics

JBL SUBBP12AM - 12” amplified 12” Subwoofer with Sub Level Control (Renewed) : Electronics

JBL BassPro 12 Ported powered subwoofer with 12 sub and 150-watt amp at Crutchfield

Kenwood eXcelon P-XW1221D Dual 12 Preloaded Subwoofer Enclosure 600W

JBL SUBBP-BASSPRO12. 12 Single Ported Subwoofer Enclosure. 450 Watts Max, 12 Loaded/Amplified Subwoofer Box with Remote Bass Knob Included. Woofer

JBL SUB BassPRO12 450 Watts Amplified 12 Ported Subwoofer Sub Box Built In Amp

Club Marine 12 Subwoofer